Komatsu Galeo BR380JG-1E0 Shop Manual page 321

30 Testing and adjusting
Service menu operation and display
Switching to service menu
a When using the service menu, switch the
screen through the following special operation.
1) Confirmation of display
Make sure that the conventional display is
turned on.
a Changing to Service Menu is usually avail-
able only from this conventional display.
2) Switch operation
Do the following switch operation.
Switch operation:
q
(Enter the numbers while holding
BR380JG-1E0
o o
[E] + [1] [2] [3]
E down)
3) Displaying menu screen
The display is changed to the initial display of
Service Menu program. Select an appropriate
item from among the menu.
No.
00 Return (Ends the service menu)
01 Monitoring
02 Abnormality record
03 Maintenance record
04 Maintenance mode change
05 Phone number entry
06 Default
07 Adjustment
08 Cylinder cut out
09 No injection cranking
10 Crusher clearance record
11 Lock cylinder slip record
4) Ending the menu and function
When ending the operation from the service
menu screen or respective menu screens,
select either of the following operations.
Press [ ] switch (enables every screen).
q
When "RETURN" switch is displayed,
q
press the applicable switch.
When "Return" menu is displayed, select
q
the menu and press [ ] switch.
SEN02304-00
Service menu
15