Komatsu Galeo BR380JG-1E0 Shop Manual page 322

SEN02304-00
20. Monitoring [01] function
The machine monitor monitors signals from the
switch sensor actuators on various machine
parts. It allows displaying and checking the
monitored information through following opera-
tions.
1) Menu selection
Select "01 Monitoring" in the initial display
of Service Menu and depress [ ] switch.
2) Setting a monitoring item
Select and register an item to be moni-
tored through the following switch opera-
tion.
[ E ] switch: Selection
q
[ R ] switch: Selection
q
[ ] switch: Registration
q
a A monitoring item can be set from 1 to
4 at maximum (Depending upon the
selected item, the max. number can
be less than four)
a In case of monitoring 1 to 3 items,
move to the monitoring information
screen through any of the following
switch operations after the registra-
tion work has been completed.
[Hold down [ ] switch (for about
q
3 seconds).
16
30 Testing and adjusting
Select menu "99999" and press
q
[ ] switch.
a When you have registered all the
items that can be registered, the
screen will be automatically switched
to the monitoring information screen.
a Monitored information are transmitted
via communication circuits. Thus the
number of selected items can impact
the communication speed. If truly real
time monitoring is required, reduce
the selected items to the minimum.
a For details on the monitoring items,
display unit, etc., refer to the "Monitor-
ing Items table".
3) Operation for monitoring
As the monitoring information screen is
displayed, confirm the monitored informa-
tion operating the machine.
4) Monitored information holding function
You can hold every monitored information
by pressing [ E ] while monitoring is contin-
ued.
If you press [ R ] switch again in this condi-
tion, the currently held information will be
released.
BR380JG-1E0