Komatsu Galeo BR380JG-1E0 Shop Manual page 377

SEN02305-01
5. Loosen the bolts of covers (6) at the top, rear,
and bottom of the flywheel cover on the left.
Remove the V-belts, starting from the outside,
then remove them from the opening at the top
of the crusher motor.
6. Fit new belts to the flywheel in the opposite
order from removal, then turn crusher V-belt
adjustment turnbuckle (3) to extend distance
(L) between the yokes and adjust the V-belt
tension.
(For details of the method of adjusting the V-
belt tension, see "Adjusting tension of crusher
drive V-belt".)
7. After completing adjustment of the V-belt ten-
sion, tighten locknuts (4) and (5).
8. Return the cover to its original position.
36
30 Testing and adjusting
BR380JG-1E0