Komatsu Galeo BR380JG-1E0 Shop Manual page 239

10 Structure, function and maintenance standard
Crusher load setting function
This function is used to set the crusher load.
q
The material is crushed properly, regardless of
its type, by adjusting the crusher pressure
switch in proportion to the load level.
This function is used while the ordinary screen
q
(travel mode, work mode, or inspection mode)
is displayed.
How to use
1) Depress crusher load set switch (1) of the
monitor to display the adjustment screen.
2) Depress the operation switch (2) to select the
crusher load.
Operation switch
3) After selecting the level, depress input check
switch (3). The selected crusher load level is
settled and the ordinary screen appears. At
the same time, the crusher load changes.
a The crusher load does not change until the
input check switch is depressed. If return
switch (4) is depressed to return to the ordinary
screen without depressing the input check
switch, the original setting is maintained.
BR380JG-1E0
Operation
Bar graph extends to right.
Bar graph retract to left.
SEN01355-00
47