Komatsu Galeo BR380JG-1E0 Shop Manual page 305

30 Testing and adjusting
Adjusting mirror (a1)
Loosen bolt (1) of the mirror and adjust the mirror
so that the operator can best see the view in front
of the machine which is a blind corner from the
operator's seat.
a When installing the mirror, adjust so that it is
possible to see any persons at the front left
and right edges of the machine (both sides of
the conveyor) or objects of a height of 1 m and
diameter of 30 cm.
Adjusting mirrors (b1) and (c1)
Loosen bolts (2) and (3) of the mirrors and adjust
the mirrors so that the operator can see a person
(an object 1 m high and 30 cm in diameter) stand-
ing in the left side of the machine which is a blind
corner from the operator's seat.
Adjusting view
Adjust each mirror so that the operator can see the
following ranges.
Mirror (a1) : Hatched part (a2) must be seen
q
Mirror (b1) : Hatched part (b2) must be seen
q
Mirror (c1) : Hatched part (c2) must be seen
q
BR380JG-1E0
SEN02303-00
47