Komatsu Galeo BR380JG-1E0 Shop Manual page 329

30 Testing and adjusting
Number Items of the maintenance mode change
Return (End of change in the maintenance
00
mode)
01 Maintenance mode on/off
02 Engine oil change int.
03 Engine oil filter change int.
04 Fuel main filter change int.
05 Hyd oil filter change int.
06 Hyd tank breather change int.
07 Corrosion resistor change int.
08 Damper case service int.
09 Final drive case oil change int.
10 Feeder vibration oil change int.
11 Crusher motor case oil change int.
12 Hydraulic oil change int.
13 Fuel pre-filter change int.
14 Initialize all items
a 01 and 14 menus are provided for
setting the whole maintenance mode,
while those from 02 through 13 are
for setting individual items.
3) Contents of Maintenance Mode On/Off
Use (On): The maintenance display
q
function of all oil and filter-related
items are turned effectual. (Irrespec-
tive of whether "On" or "Off" set for
individual items, this setting prevails)
Not use (Off): The maintenance dis-
q
play function of all oils and filter-
related items is disabled (prece-
dence is given to this setting over the
"On" or "Off" selected for an individual
items).
BR380JG-1E0
4) Description of individual setting items
(1): Default value: The maintenance time
set in the monitor (recommended by
the manufacturer and cannot be
changed).
(2): Set value: Denotes the maintenance
time that can be freely set. The main-
tenance mode operates based on this
time (the time can be increased or
decreased in multiple of 50 hours by
use of [E] and [R] switches).
(3): Use (On): Maintenance display func-
tion for this item is enabled.
(4): Not use (Off): Maintenance display
function for this item is disabled.
a The lower limit of this setting is 50
hours.
5) Description of "Initialize all items"
Select this menu and then press [
switch to restore the default value for the
individually set information.
SEN02304-00
]
23