Komatsu Galeo BR380JG-1E0 Shop Manual page 156

10 Structure, function and maintenance standard
The pressurized oil on the supply side flows to
q
chamber (S1) via orifice (E1) and orifice (E2) of
the spool (19).
As the pressure in chamber (S1) goes above
q
the spool selector pressure, spool (19) is
pushed toward right.
Port (MB) and port (PB) are connected, open-
q
ing the motor outlet port side and starting the
motor rotating.
BR380JG-1E0
Operation of brake during travelling downhill
If indication of the machine runaway is sensed
q
while travelling downhill, the motor will be
caused to rotate without load to decrease the
inlet side oil pressure.
Pressure in chamber (S1) is released via ori-
q
fices (E1) and (E2).
As the pressure in chamber (S1) goes below
q
the spool selector pressure, spool (19) is
returned to the left by spring (20) and outlet
port (MB) is throttled.
The pressure at the outlet port side rises, gen-
q
erating rotation resistance on the motor to pre-
vent the machine from running away.
The spool moves to a position where the pres-
q
sure on outlet port (MB) can be balanced
against the machine's own weight and the inlet
port pressure.
Oil flow from the outlet circuit is reduced to
q
ensure the travel speed corresponded to the
pump delivery.
SEN01353-00
13