Komatsu Galeo BR380JG-1E0 Shop Manual page 334

SEN02304-00
1] Check that the display is in the ordi-
nary display mode.
2] Set mode selector switch (1) of the
main control box in the testing mode
position.
3] Set clearance adjustment selector
switch (2) of the main control box in
the manual mode position.
4] Rotate the crusher with crusher man-
ual forward switch (3) and reverse
switch (4) of the machine monitor to
bring mark (B) of the flywheel to the
center of adjustment range (A).
5] Depress crusher clearance closing
switch (5) of the machine monitor to
press the swing jaw of the crusher
against the fixed jaw (and the monitor
buzzer sounds).
6] Select the service menu to display the
clearance potentiometer initialization
screen.
7] Depress "1" (SET) on the clearance
potentiometer initialization screen.
28
7) Function for option registration
Use/Disuse of the options of the machine
can be set.
1] On the option setting menu screen,
move the cursor with the [E] switch
and [R] switch to an option to be
adjusted and press the [ ] switch.
Number Option registration menu
00 Return (Finish adjustment)
01 Magnetic separator
02 Muck discharge conveyor
03 Overfeed sensor
04 2nd conveyor
05 Vibrator screen
06 Travel lever
2] The screen changes to the use (on)/
disuse (off) setting screen for the
selected option.
Move the cursor with the [E] switch
and [R] switch to "Use"/"Disuse" and
press the [ ] switch.
3] When the option is set normally, the
monitor buzzer sounds for 3 seconds
and then the screen returns to the
previous screen.
30 Testing and adjusting
BR380JG-1E0