Table of Contents
Advertisement
30 Testing and adjusting
Check tension of conveyor belt
1.
Remove rubber cover (A) at the side of the
machine.
2.
Place wooden block (B) on top of the conveyor
between both sides (C) – (D) of the conveyor
frame at cross-section A – A where the con-
veyor frame bends.
3.
Measure the maximum deflection of the con-
veyor belt top surface from the bottom surface
of the wooden block.
Standard value for deflection
Deflection (a) should be 170 to 175 mm.
BR380JG-1E0
SEN02305-01
39
Advertisement
Table of Contents
Troubleshooting
