Factory Setting; Specific Factory Settings For The Analog Version - Siemens SINAMICS G110 Operating Instructions Manual

Issue 11/04
3

Factory setting

The SINAMICS G110 frequency inverter has already been programmed at the
factory (motor parameters P0304, P0305, P0307, P0310), for standard V/f
applications on Siemens 4-pole asynchronous motors 1LA that have the same
power rating as the inverters
Further factory setting
Command sources
Setpoint source
Motor cooling
Motor current limit
Min. frequency
Max. frequency
Ramp-up time
Ramp-down time
Control mode V/f
3.1

Specific factory settings for the analog version

Digital input
Command source
Setpoint source
Digital input 0
Digital input 1
Digital input 2
Control method
Fig. 3-1
SINAMICS G110
Operating Instructions (Compact)
P0700 see Section 3.1/3.2
P1000 see Section 3.1/3.2
P0335 = 0 (self-cooled)
P0640 = 150%
P1080 = 0 Hz
P1082 = 50 Hz
P1120 = 10 s
P1121 = 10 s
P1300 = 0 (V/f with linear characteristic)
Terminals Parameter
3, 4, 5 P0700 = 2
9 P1000 = 2
3 P0701 = 1
4 P0702 = 12
5 P0703 = 9
- P0727 = 0
Connections, analog version
3 Factory setting
Function
Digital input
Analog input
ON / OFF1 (I/O)
Reverse ( )
Fault reset (Ack)
Siemens standard control
9