Bar Code Labels; Audio Volume - Intermec 700 Series 700 User Manual

—
Appendix B Bar Codes

Bar Code Labels

Audio Volume

366
You can change some settings on your 700 Series Computer by scanning
the following Code 39 bar code labels.
S You can use the Data Collection control panel to set the three Virtual
Wedge parameters (starting on page 317).
Note: When you use a bar code creation utility to make a scannable bar
code label, the utility probably adds opening and closing asterisks automat-
ically. Asterisks are included here for translation purposes.
Note: The Audio Volume parameter information is on page 352.
Turn Audio Off
*$+BV0*
*$+BV0*
Set Audio Volume to very quiet
*$+BV1*
*$+VB1*
Set Audio Volume to quiet
*$+BV2*
*$+BV2*
Set Audio Volume to normal (default)
*$+BV3*
*$+BV3*
Set Audio Volume to loud
*$+BV4*
*$+BV4*
Set Audio Volume to very loud
*$+BV5*
*$+BV5*
700 Series Monochrome Mobile Computer User's Manual