Intermec 700 Series 700 User Manual page 146

—
Chapter 4 Network Support
130
S Module Firmware:
This reflects the firmware (hardware) version of the 700 Series Comput-
er. When the CORE module first installs onto the unit, the firmware
level is unknown, thus "...reading" is displayed. Once the firmware level
is read from the unit, then a three-digit decimal value is displayed.
S Stack [Stack Version] [loaded/not loaded]:
[Stack Version] displays the Bluetooth stack version, which appears in
the "1.2.3.4" format. If the stack is loaded, then "loaded" is displayed
after the stack version, otherwise "not loaded" is displayed.
S Device Name:
This displays the device name as assigned to the Bluetooth compatible
module by the end-user. If the configured name is longer than the space
allowed, it will be truncated.
S BTpak Version:
This displays the driver version of additional Bluetooth components
within the 700 Series Computer and is usually presented in the "1.2.3"
format. The version may also contain a letter at either end.
S History:
This bar graph displays an active history of the Bluetooth driver's quali-
ty of connections.
S Friendly Indicator:
If the Bluetooth stack is loaded, then all three dots are filled. These dots
are left empty if the stack is not loaded. These dots do vary based on the
CORE application's perception of the overall connection quality.
700 Series Monochrome Mobile Computer User's Manual