Is9Cconfig::setcode128 - Intermec 700 Series 700 User Manual

700 Series Monochrome Mobile Computer User's Manual

IS9CConfig::SetCode128

This function updates the Code 128 settings with new values.
Syntax
HRESULT IS9CConfig::SetCode128( ITC_CODE128_DECODING
eDecode, ITC_EAN128_IDENTIFIER eEan128Ident,
ITC_CODE128_CIP128 eCip128State, BYTE byFNC1, DWORD
dwLength );
Parameters
eDecode [in] Identifies the decoding for Code 128 symbology.
eEan128Ident [in] Identifies the EAN 128 identifier.
eCip128State [in] Identifies the CIP 128.
byFNC1 [in] Identifies the FNC1 separator character, usually
dwLength [in] Identifies the bar code length.
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
None.
Chapter 6
any ASCII value.
—
Scanner Support
187