Is9Cconfig::gettelepen - Intermec 700 Series 700 User Manual

700 Series Monochrome Mobile Computer User's Manual

IS9CConfig::GetTelepen

This function retrieves the current Telepen settings.
Syntax
HRESULT IS9CConfig::GetTelepen( ITC_TELEPEN_DECODING*
peDecode, ITC_TELEPEN_FORMAT* peFormat );
Parameters
peDecode [out] Pointer to the ITC_TELEPEN_DECODING
location to receive the decoding for TELEPEN
symbology.
peFormat [out] Pointer to the ITC_TELEPEN_FORMAT location to
receive the format.
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
None.
—
Chapter 6 Scanner Support
209