Intermec 700 Series 700 User Manual page 125

700 Series Monochrome Mobile Computer User's Manual
S History:
This bar graph displays an active history of this radio module's quality
of connections.
S Friendly Indicator:
Usually indicates the signal strength for this radio module. Three filled
dots indicate a high quality or strong signal. Three empty dots indicate
that the signal is out of range or there is no signal detected.
WAN Radio CORE Module — Details
Below are descriptions and meanings for each piece of information that
may appear via the Details tab. See your CDPD radio module documenta-
tion for information not addressed in this manual. Note that this informa-
tion is listed alphabetically.
S Configure:
Tap this button to configure the Expedite CDPD radio module. Do
your adjustments, then tap OK to set your changes and return to the
Details page, or tap Cancel to exit this page without resetting the radio
module.
S Explain Errors:
Tap this to view the definitions assigned to the last registration error.
Tap ok to return to the Details page.
The following is a listing of the registration errors that can be reported
in the Expedite CORE module on the Details tab.
S 1: No reason given
S 2: MD-IS not capable of handling the M-ES at this time
S 3: NEI is not authorized to use this subnetwork
S 4: M-ES gave insufficient authentication credentials
S 5: M-ES gave unsupported authentication credentials
S 6: NEI has exceeded usage limitations
S 7: Service denied on this subnetwork; Service may be obtained on
alternate Service Provider Network
S 8-255: Reserved
S RAS connected:
This indicates the status of your Remote Access Server (RAS).
—
Chapter 4 Network Support
109