Receiving Information; Connecting To An Internet Service Provider; Creating A Modem Connection To An Isp - Intermec 700 Series 700 User Manual

—
Chapter 2 Pocket PC 2002

Connecting to an Internet Service Provider

74

Receiving Information

1 Align the IR ports so that they are unobstructed and within a close
range.
2 Have the owner of the other 700 Series Computer send the information
to you. Your 700 Series Computer will automatically receive it.
You can connect to your ISP, and use the connection to send and receive
e-mail messages and view Web or WAP pages. You can connect to your
ISP in one of two ways:
S Create a modem connection. If this is the method you want to use, see
"Creating a Modem Connection to an ISP" below.
S Use an Ethernet card and a net tap to connect to the network. If this is
the method you want to use, see "Creating an Ethernet Connection to an
ISP" on page 78.

Creating a Modem Connection to an ISP

1 Obtain the following information from your ISP. Some ISPs require
information in front of the user name, such as MSN/username.
S ISP dial-up access telephone number
S User name
S Password
S TCP/IP settings
2 If your 700 Series Computer does not have a built-in modem, install a
modem card, or use or use a NULL modem cable and appropriate
adapters to connect an external modem to your 700 Series Computer
through the serial port.
3 Tap Start → Settings → the Connections tab → the Connections icon.
Under the When needed, automatically connect to The Internet using
these settings, select Internet Settings from the drop-down list, then tap
Modify.
700 Series Monochrome Mobile Computer User's Manual