Using Microsoft Activesync - Intermec 700 Series 700 User Manual

Using Microsoft ActiveSync

700 Series Monochrome Mobile Computer User's Manual
Note: These instructions assume that the 700 Mono Utilities portion of
the 700 Monochrome Software Tools CD was installed onto your desktop.
The Microsoft ActiveSync tool is located on the 700 Monochrome Com-
panion CD. See Chapter 2, "Pocket PC 2002," for information about this
tool as provided by Microsoft Corporation.
This can be a serial, USB, Ethernet, InfraRed, or 802.11b ActiveSync con-
nection. Files can then be copied using File Explorer on a PC or a laptop
computer. This option is usually only good when updating a few 700 Se-
ries Computers.
These instructions assume that Microsoft ActiveSync was installed onto
your desktop computer and is up and running. If not, go to Chapter 2,
"Pocket PC 2002," for an URL from which you can download the latest
application.
1 Connect your 700 Series Computer to your desktop computer via an
ActiveSync cable or IrDA.
2 Wait for a "Connected" message to appear in the Microsoft ActiveSync
application to signal a connection to the 700 Series Computer. If neces-
sary, select File → Get Connected to initiate a connection.
3 Click Explore to access the Mobile Device directory on your 700 Series
Computer.
—
Chapter 3 Installing Applications
91