Bluetooth Core Module (Bluealps) - Intermec 700 Series 700 User Manual

700 Series Monochrome Mobile Computer User's Manual

Bluetooth CORE Module (Bluealps)

Note: See page 98 for information on loading this module in CORE.
The Bluealps CORE module displays helpful information about the wire-
less printing option within your 700 Series Computer. Below are descrip-
tions and meanings for each piece of information provided via the General
tab.
S Bluetooth:
This is the network type. "Point to Point" is the type of connection sup-
ported as of this publication. Scatternets are currently not supported.
S Device Address:
This provides the network address, which in this case, will be replaced
by the device address of the Bluetooth compatible module within your
700 Series Computer. Note that this address is universally unique.
S Discoverable:
The following is displayed depending on whether the 700 Series Com-
puter is configured to be discoverable:
"Gen" Generally discoverable
"Lim" Limited discovery
"No" Not discoverable
S Connectable:
This defines whether the 700 Series Computer is able to accept other
devices with Bluetooth compatible modules connecting to it. "Yes" indi-
cates the connection is available, "No" indicates it is not available.
S Bondable:
This defines the security element of the 700 Series Computer, which is
the bondable setting. If the unit is bondable, then "Yes" is displayed,
otherwise "No" is displayed.
—
Chapter 4 Network Support
129