Connecting To Work; Creating A Modem Connection To Work - Intermec 700 Series 700 User Manual

Connecting to Work

700 Series Monochrome Mobile Computer User's Manual
5 Connect the Ethernet card or dock to the network by using a network
cable. For information, see your owner's manual.
6 Tap Start → Settings → the Connections tab → the Connections icon.
From the My network card connects to drop-down list, select "The In-
ternet."
To start the connection, simply start using one of the programs listed in
the preceding section. Once connected, you can perform the same activi-
ties as listed in the preceding section.
If you have access to a network at work, you can send e-mail messages,
view intranet pages, synchronize your 700 Series Computer, and possibly
access the Internet. You can connect to work in one of two ways:
S Create a modem connection by using a RAS (Remote Access Server)
account. Before you can create this modem connection, your network
administrator will need to set up a RAS account for you. If this is the
method you want to use, see "Creating a Modem Connection to Work"
below. Your network administrator may also give you VPN settings.
S Use an Ethernet card and a net tap to connect to the network. If this is
the method you want to use, see "Creating an Ethernet Connection to
Work" on page 83.

Creating a Modem Connection to Work

1 Get the following information from your network administrator:
S Dial-up access telephone number
S User name
S Password
S Domain name
S TCP/IP settings
—
Chapter 2 Pocket PC 2002
79