Traps
700 Series Monochrome Mobile Computer User's Manual
To access the settings from the 700 Series Computer, tap Start → Settings
→ the System tab → the SNMP icon → the Traps tab to access its
parameters.
The following are authentication and threshold parameters for traps. Note
that these are listed in the order of their appearance within the Traps tab.
Authentication
Determines whether to send authentication traps. When trap authentica-
tion is enabled, an authentication trap is sent if an SNMP packet is re-
ceived by the master agent with an invalid community string.
Action
Tap the Authentication parameter, then select an option to change this
parameter setting.
SNMP OID
1.3.6.1.4.1.1963.10.5.2.2.0
Options
1
On (default)
2
Off
—
Appendix
A
Configurable Settings
333