Intermec 700 Series 700 User Manual page 363

Monochrome mobile computer

Hide thumbs Also See for 700 Series 700:

Table of Contents

700 Series Monochrome Mobile Computer User's Manual

3 If needed, clear the Enable Power Management box.

4 Click Advanced to set the radio infrastructure mode for this profile,

then OK to return to the Profiles screen.

S If you select "AP Mode" (default)

Select the appropriate density (Low, Medium, High, Macro Cell, or

Micro Cell) from the AP Density drop-down list. Default is Medium.

S If you select "Peer to Peer"

Select the appropriate channel (1–11) from the Channel drop-down

list. Default is Channel 6.

Click Apply to set these changes and go to another profile. Click OK to

set these changes and exit the Profiles page. Click Cancel to exit the Pro-

files page without saving any changes.

Configurable Settings