At Command Interface - Intermec 700 Series 700 User Manual

http://www.novatelwireless.com/support/support_expedite.html#Downloads
700 Series Monochrome Mobile Computer User's Manual

AT Command Interface

This interface specification is for both the GSM/GPRS and CDPD radio
modules and is based on the following recommendation:
S ETSI GSM 07.05:
European Digital Cellular Telecommunication System (phase 2)
Use of DTE-DCE interface for Short message and cell broadcast service.
S ETSI GSM 07.07:
European Digital Cellular Telecommunication System (phase 2)
AT command set for GSM Mobile Equipment.
S ITU-T Recommendation V.25 ter
Serial asynchronous automatic dialing and control.
Note: You will need the Adobe Acrobat Reader application to view a PDF
document. Go to http://www.adobe.com/prodindex/acrobat/readstep.html
to install or download the latest Adobe Acrobat Reader according to
Adobe's instructions.
Command Set for Motorola G18
Use the G18 AT command list from Motorola to program the
GPRS/GSM G18 radio module. The "G18 Developer Manual" is available
either from Intermec Technologies or from Motorola, Inc. Contact either
your Intermec representative or the Motorola support personnel at the fol-
lowing URL for more information. Note that this URL is subject to change.
http://www.motorola.com/
Command Set for Novatel Expedite
Use the Expedite AT command interface from Novatel Wireless, Inc. to
program the CDPD Expedite radio module. The "Expedite AT Command
Set" documentation is available either from Intermec Technologies. Con-
tact your Intermec representative for information. Use the following URL
to download the latest PDF copy of the "AT Command Guide" from the
Novatel Wireless, Inc web site or contact their support personnel for more
information. Note that this URL is subject to change.
Command Set for Mobitex RIM902 and DataTAC RIM802
Use the appropriate AT command interface to develop either the Mobitex
RIM902 or the DataTAC RIM 802. Both the "RIM802 Integrator's
Guide" and the "RIM902 Developer's Guide" are available either from In-
termec Technologies or from the Research In Motion, Limited web site.
Contact either your Intermec representative or the RIM support personnel
at the following URL for more information. Note that this URL is subject to
change.
http://www.rim.net/oem/tools/index.shtml
—
Chapter 4 Network Support
121