Intermec 700 Series 700 User Manual page 140

Monochrome mobile computer

Hide thumbs Also See for 700 Series 700:

Table of Contents

Network Support

6 Press and hold the new connection for a pop-up menu, then tap

Connect to initiate the connection. Wait for about ten seconds for the

Network Log On screen, then tap OK. Note: You do not need to enter

any information within the Network Log On screen.

7 Use either the onscreen keyboard, or press the keys to type any of the

AT commands provided. Press or tap Enter to send each command.

The results of each command sent will print onscreen - see the sample

illustration below. Note that each "AT" command must start with either

the "at" or "at+" characters.

S To see what you typed onscreen, type "ate1" to initiate the AT Echo

command, then press Enter.

700 Series Monochrome Mobile Computer User's Manual