Is9Cconfig::getmsi - Intermec 700 Series 700 User Manual

700 Series Monochrome Mobile Computer User's Manual

IS9CConfig::GetMSI

This function retrieves the current MSI settings.
Syntax
HRESULT IS9CConfig::GetMSI( ITC_MSI_DECODING* peDecode,
ITC_MSI_CHECK_DIGIT* peCheck, DWORD* pdwLength );
Parameters
peDecode [out]
peCheck [out]
pdwLength [out]
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
None.
Chapter 6
Pointer to the ITC_MSI_DECODING location to
receive the decoding for MSI symbology.
Pointer to the ITC_MSI_CHECK_DIGIT
location to receive the check digit.
Pointer to the DWORD location to receive the bar
code length.
—
Scanner Support
195