Is9Cconfig2::Setglobalamble - Intermec 700 Series 700 User Manual

700 Series Monochrome Mobile Computer User's Manual

IS9CConfig2::SetGlobalAmble

This function updates the scanner's current preamble or postamble setting
depending on the input parameters.
Syntax
HRESULT SetGlobalAmble( ITC_GLOBAL_AMBLE_ID eAmbleId, BYTE
rgbBuffer[], DWORD dwBufferSize );
Parameters
eAmbleId [in] An enumeration of type
rgbBuffer [in] Contains the buffer for the postamble or preamble
dwBufferSize [in] Identifies number of bytes in rgbBuffer.
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
None.
Chapter 6
ITC_GLOBAL_AMBLE_ID identifies whether
the preamble or postamble setting is to be updated.
Only one setting can be updated at a time.
setting to be updated.
—
Scanner Support
227