Intermec 700 Series 700 User Manual page 327

Action: Tap (+) to expand the Symbology ID parameter, select the Code 39 user
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.3.1
Options: x
Action: Tap (+) to expand the Symbology ID parameter, select the Code 128 user
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.5.1
Options: x
Action: Tap (+) to expand the Symbology ID parameter, select the Codabar user
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.2.1
Options: x
700 Series Monochrome Mobile Computer User's Manual
Code 39 User ID
If "1" was selected in the Symbology ID parameter, you can set your own
ASCII character to identify Code 39 bar code data.
ID parameter, then enter a user ID value to change this parameter setting.
where x is a single ASCII character. Default is asterisk (*).
Code 128 User ID
If "1" was selected in the Symbology ID parameter, you can set your own
ASCII character to identify Code 128 bar code data.
ID parameter, then enter a user ID value to change this parameter setting.
where x is a single ASCII character. Default is D.
Codabar User ID
If "1" was selected in the Symbology ID parameter, you can set your own
ASCII character to identify Codabar bar code data.
ID parameter, then enter a user ID value to change this parameter setting.
where x is a single ASCII character. Default is D.
—
Appendix A Configurable Settings
311