Intermec 700 Series 700 User Manual page 330

—
Appendix A Configurable Settings
Action: Tap (+) to expand the Symbology ID parameter, select the Matrix 2 of 5
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.24.1
Options: x
Action: Tap (+) to expand the Symbology ID parameter, select the Telepen user
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.25.1
Options: x
Action: Tap (+) to expand the Symbology ID parameter, select the Code 11 user
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.16.1
Options: x
314
Matrix 2 of 5 User ID
If "1" was selected in the Symbology ID parameter, you can set your own
ASCII character to identify Matrix 2 of 5 bar code data.
user ID parameter, then enter a user ID value to change this parameter
setting.
where x is a single ASCII character. Default is D.
Telepen User ID
If "1" was selected in the Symbology ID parameter, you can set your own
ASCII character to identify Telepen bar code data.
ID parameter, then enter a user ID value to change this parameter setting.
where x is a single ASCII character. Default is an asterisk (*).
Code 11 User ID
If "1" was selected in the Symbology ID parameter, you can set your own
ASCII character to identify Code 11 bar code data.
ID parameter, then enter a user ID value to change this parameter setting.
where x is a single ASCII character. Default is asterisk (*).
700 Series Monochrome Mobile Computer User's Manual