Intermec 700 Series 700 User Manual page 135

700 Series Monochrome Mobile Computer User's Manual
S Operator:
This lists the name of the service providing the network support such as
"USA–770" or lists "Unavailable" if there is no service.
S Revision:
This identifies the firmware version, or lists "Unavailable" if the version
number cannot be read from the radio module.
S RSSI:
This displays the RSSI frequency or lists "Unavailable" if there is no sig-
nal or the signal cannot be retrieved from the radio module.
S Serial Status:
This indicates whether serial communications passed ("PASS") or failed
("FAIL") in its last transaction. A status of "FAIL" typically indicates
that the 700 Series Computer is unable to establish communication
with the radio module installed within.
Terminal Application
Tap Terminal App from the Details page to send standard AT commands.
Information about these AT commands are available under "AT Command
Interface" on page 121.
Enter an AT command in the field beneath the textbox, then tap Send.
The results of each test appears in the text box. Tap ok to close this screen
and return to the Details page.
—
Chapter 4 Network Support
119