Cab Files - Intermec 700 Series 700 User Manual

—
Appendix A Configurable Settings

CAB Files

340
You can view the latest developer or released version of each CAB file from
Intermec Technologies Corporation that are installed in your 700 Series
Computer via the Unit Information control panel applet. Custom CAB
files are not displayed in this applet. See the Software Tools User's Manual for
more information about these files.
To access the information from the 700 Series Computer, tap Start →
Settings → the System tab → the Unit Information icon → the CAB
Files tab to view the current CAB file versions. Tap ok to exit this
information.
When a CAB file is built, a registry entry is created with a build number
for that file. This CAB Files control panel applet looks for a registry key
for each CAB file installed. When the registry entry is found, the CAB file
name and version number information are displayed. If a CAB file has not
been installed, then its information is not displayed.
Below is a list of CAB files from Intermec Technologies that are available
for your 700 Series Computer with their latest developer or released ver-
sion of the software build. Should you need to add any of these to your
700 Series Computer, contact an Intermec representative.
S BTMainStack:
Both BtMainStack and PPCbtpak CAB files are needed for proper Blue-
tooth operation. These CAB files should be included in your
"\CabFiles" directory to allow Bluetooth support to autoinstall on sys-
tem cold-boot. See Chapter 3 "Installing Applications," for more informa-
tion about the "\CabFiles" directory. See Chapter 4, "Network Support," for
more information about Bluetooth wireless printing.
S Comm Port Wedge:
The software build for the Comm Port Wedge. Note that the Comm Port
Wedge CAB file is available on the 700 Monochrome Tools CD.
700 Series Monochrome Mobile Computer User's Manual