Modifying Rmon Alarm Settings - Cisco ESW 500 Administration Manual

Viewing Statistics
Configuring RMON History
STEP 3
STEP 4
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
•
Rising Event — Selects an event which is defined in the Events table that
triggers the rising threshold alarm. The Events Table is displayed in the
Events Page
.
•
Falling Threshold — Displays the falling counter value that triggers the falling
threshold alarm. The falling threshold is graphically presented on top of the
graph bars. Each monitored variable is designated a color.
•
Falling Event — Selects an event which is defined in the Events table that
triggers the falling threshold alarm. The Events Table is displayed in the
Events Page
.
•
Startup Alarm — Displays the trigger that activates the alarm generation.
Rising is defined by crossing the threshold from a low-value threshold to a
higher-value threshold.
-
Rising Alarm
alarm.
-
Falling Alarm
threshold alarm.
-
Rising and Falling
alarm.
•
Interval — Defines the alarm interval time in seconds.
•
Owner — Displays the device or user that defined the alarm.
Define the relevant fields.
Click Apply. The RMON alarm is added, and the device is updated.

Modifying RMON Alarm Settings

Click Statistics > RMON (Remote Management) > Alarms. The
opens:
Click the Edit Button. The
— The rising counter value that triggers the rising threshold
— The falling counter value that triggers the falling
— The rising and falling counter values that trigger the
Edit RMON Alarm Page
RMON Alarms Page
opens:
17
RMON
RMON
410