Cisco ESW 500 Administration Manual page 315

Configuring Quality of Service
Defining General Settings
ESW 500 Series Switches Administration Guide
Queue Page (Gigabit devices)
Queue Page
The contains the following fields:
•
Fast Ethernet — Select whether traffic scheduling on Fast Ethernet interfaces is
based on either Strict Priority or WRR. This field is applicable to FE devices
only (not applicable to ESW 520-8P devices). The possible field values are:
-
Strict Priority
is based strictly on the queue priority.
-
WRR
— Indicates that traffic scheduling for the selected queue is based
strictly on the WRR. If WRR is selected, the predetermined weights 1, 2,
4 and 8 are assigned to queues 1, 2, 3 and 4 respectively.
•
Queue — Displays the queue for which the queue settings are displayed. The
possible field range is 1 - 4.
•
WRR Weight — Displays the WRR weight assigned to the queue by the user.
•
% of WRR Bandwidth — Indicates the amount of bandwidth assigned to the
queue. These values represent the % of the WRR Weight configured by the
user.
— Indicates that traffic scheduling for the selected queue
12
304