Cisco ESW 500 Administration Manual page 182

Configuring Device Security
Defining DoS Prevention
STEP 1
ESW 500 Series Switches Administration Guide
Click Security > DoS Prevention > Global Settings. The
opens:
Global Settings Page
Global Settings Page
The
•
Security Suite Status — Indicates if DoS security is enabled on the device. The
possible field values are:
•
Enable
— Enables DoS security.
•
Disable
— Disables DoS security on the device. This is the default value.
•
Denial of Service Protection — Indicates if any of the services listed below are
enabled. If the service protection is disabled, the
Invasor Trojan
, and
•
Stacheldraht Distribution — Discards TCP packets with source TCP port equal
to 16660
•
Invasor Trojan — Discards TCP packets with destination TCP port equal to
2140 and source TCP port equal to 1024.
contains the following fields:
Back Orifice Trojan
fields are disabled.
Global Settings Page
Stacheldraht Distribution
5
,
171