Cisco ESW 500 Administration Manual page 371

Configuring SNMP
Managing Cisco Discovery Protocol
STEP 2
STEP 3
STEP 4
ESW 500 Series Switches Administration Guide
•
Device ID — Indicates the device ID TLV which is advertised by
neighboring devices.
•
Local Interface — Indicates the receiving port number.
•
Advertise Version — Indicates the CDP version advertised by the
neighboring device.
•
Time to Live — Indicates the amount of time in seconds before the
neighboring device CDP information is aged out. The field default is 180
seconds.
•
Capabilities — Indicates the device capabilities advertised by the
neighboring devices. The possible field values are:
-
R — Router
-
T — Trans Bridge
-
B — Source Route Bridge
-
S — Switch
-
H — Host
-
I — IGMP
-
r — Repeater
-
P — Phone
-
D — Remote
-
C — CVTA
-
M — Two-port MAC Relay
•
Platform — Indicates product name and model number of the neighboring
device.
•
Port ID — Indicates the neighboring device's port from which the CDP
packet was sent.
Select Enable in the CDP Status
the device.
Define a VLAN ID to be advertised by the device in the
Click Apply. CDP is enabled, and the device is updated.
To view additional neighboring device CDP information:
field to enable the Cisco Discovery Protocol on
13
Voice VLAN
field.
360