Cisco ESW 500 Administration Manual page 196

Configuring Device Security
Defining DHCP Snooping
STEP 1
STEP 2
STEP 3
ESW 500 Series Switches Administration Guide
Click Security > DHCP Snooping > IP Source Guard > Properties. The
Guard Properties Page
IP Source Guard Properties Page
IP Source Guard Properties Page
The
•
IP Source Guard Status — Enables the use of IP Source Guard status on the
device.
-
Enable
— Indicates that IP Source Guard is enabled for the device.
-
Disable
— Indicates that IP Source Guard is disabled for the device.
Enable or Disable use of IP Source Guard on the device.
Click Apply. The IP Source Guard configuration is modified, and the device is
updated.
opens:
contains the following fields:
5
IP Source
185