Via Http; Active Image - Cisco ESW 500 Administration Manual

Managing System Files

Active Image

STEP 2
STEP 3
Active Image
ESW 500 Series Switches Administration Guide
•
Destination File Type — Specifies the type of configuration file to be created.
The possible values are:
-
Running Config
device.
-
Starting Config
following system startup or reboot. The Startup configuration is only
active after the device is reset.
-
Backup Config
restoration following a shutdown or a fault.

Via HTTP

Browse
Use the button to navigate to the file.
•
File Name — Name of the source configuration file.
Define the relevant fields and filenames.
Click Apply. The Copy configuration is defined, and the device is updated.
Active Image Page
The
Images are activated only after the device is reset.
— Contains the configuration currently valid on the
— Contains the configuration which will be valid
— Contains a copy of the system configuration for
allows network managers to select the Image files.
14
368