Using The Switch Console Port; Selecting Menu Options And Actions - Cisco ESW 500 Administration Manual

Getting Started

Using The Switch Console Port

Using The Switch Console Port
TIP
STEP 1
STEP 2
STEP 3
ESW 500 Series Switches Administration Guide
The switch features a menu-based console interface for basic configuration of the
switch and management of your network. The switch can be configured using the
menu-based interface through the console port or through a telnet connection.
This section describes console interface configuration.
Configuration of the switch through the Console Port requires advanced skills. This
should only be attempted by trained personnel.

Selecting Menu Options and Actions

Within the Console Interface, menus list options in numeric order. Actions appear
at the end of the page. To select menu options and actions, use the following keys
on your keyboard:
Key Function
Arrow keys Move the cursor up, down, left, or right.
Number key Press the menu number and then press Enter key to
select a menu option.
Tab Move the cursor from one field to the next on an editing
page.
Enter Select an option that is highlighted by the cursor.
Esc Return to the previous menu or page, or move cursor
from editable fields to
Use the following steps to connect to the switch using the console:
Power up the ESW 500 Series switch.
Connect it to the network if required.
Use the console cable supplied with the switch to connect the serial port on the
PC to the console port on the switch.
Action
list.
1
37