Arp Table - Cisco ESW 500 Administration Manual

Configuring IP Information
Managing ARP
STEP 2
STEP 3
STEP 4
ESW 500 Series Switches Administration Guide

ARP Table

•
Interface — Indicates the interface for which the ARP parameters are defined.
•
IP Address — Indicates the station IP address, which is associated with the
MAC address.
•
MAC Address — Indicates the station MAC address, which is associated in the
ARP table with the IP address.
•
Status — Indicates the ARP Table entry status. Possible field values are:
-
Dynamic
— Indicates the ARP entry was learned dynamically.
-
Static
— Indicates the ARP entry is a static entry.
Add ARP Page
Click Add. The
Add ARP Page
Add ARP Page
The contains the following fields:
•
VLAN — Indicates the ARP-enabled interface.
•
IP Address — Indicates the station IP address, which is associated with the
MAC address filled in below.
•
MAC Address — Indicates the station MAC address, which is associated in the
ARP table with the IP address.
Define the relevant fields.
Click Apply. The ARP Settings are defined, and the device is updated.
opens:
8
238