Adding An Ip Based Rule - Cisco ESW 500 Administration Manual

Configuring Device Security
Defining Access Control
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
ESW 500 Series Switches Administration Guide
Define the relevant fields,
Click Apply. The IP Based ACL is modified, and the device is updated.

Adding an IP Based Rule

Click Security > Access Control Lists (ACL) > IP Based ACL. The
Page
opens:
Select an ACL from the ACL Name drop-down list.
Click the Add Rule button. The
Add IP Based Rule Page
Add IP Based Rule Page
The
•
ACL Name — Displays the user-defined IP based ACLs.
•
New Rule Priority — Indicates the rule priority, which determines which rule is
matched to a packet on a first-match basis.
•
Protocol — Creates an ACE based on a specific protocol. For a list of available
protocols, see the Protocol field description in the
Add IP Based Rule Page
contains the following fields:
IP Based ACL
opens:
IP Based ACL Page
above.
5
166