Cisco ESW 500 Administration Manual page 79

Managing Smart Ports
Configuring Smart Ports for IP Phones and Desktops
STEP 5
STEP 6
STEP 7
ESW 500 Series Switches Administration Guide
•
Max MAC Addresses — Indicates the maximum number of MAC addresses
that can be learned on the port. A maximum of 3 MAC addresses can be
learned on the port.
•
Port Security Action — Indicates the action applied to packets arriving on a
locked port. The possible field value is:
-
Discard
— Discards packets from any unlearned source. This is the
default value.
•
Violation Trap Every — Indicates that traps are sent every 60 seconds:
•
Broadcast Storm Control — Indicates if the percentage of Broadcast Storm
Control enabled on the port. The default value is 10% of the port speed.
•
Spanning Tree Port Fast — Indicates if Fast Link is enabled on the port. If Fast
Link mode is enabled for a port, the Port State is automatically placed in the
Forwarding state when the port link is up. Fast Link optimizes the STP protocol
convergence. STP convergence can take 30-60 seconds in large networks.
Fast Port is enabled by default.
•
Spanning Tree BPDU Guard — Indicates if BPDU Guard is enabled on the
interface. BPDU Guard protects the network from invalid configurations. It is
usually used either when fast link ports (ports connected to clients) are enabled
or when STP is disabled. If a BPDU message is received, the port shuts down
and the device generates an appropriate SNMP trap. BPDU guard is enabled
by default.
•
QoS Policy — Indicates that the default QoS policy settings are applied to the
port. The Default policy is voice-map.
•
Macro Description — Indicates the type of device connected to the port. For
IP Phones + Desktops, this field is always
Select a VLAN in the
Click Apply. The IP Phone + Desktop port settings are saved, and the device is
updated.
Click OK. The Smart ports Setting page opens.
Data VLAN
drop-down list.
IP Phones + Desktops
3
.
68