Query By; Query Results - Cisco ESW 500 Administration Manual

Configuring Device Security
Defining DHCP Snooping
STEP 2
STEP 3
ESW 500 Series Switches Administration Guide

Query By

In the Query By section, select and define the preferred filter for searching the IP
Source Guard Database:
•
MAC Address — Queries the database by MAC address.
•
IP Address — Queries the database by IP address.
•
VLAN — Queries the database by VLAN ID.
•
Interface — Queries the database by interface number. The possible field
values are:
-
Port
— Queries the database by a specific port number.
-
EtherChannel
Click Query. The results appear in the Query Results table.

Query Results

The Query Results table contains the following fields:
•
Interface — Displays the interface number.
•
Status — Displays the current interface status. The possible field values are:
-
Active
— Indicates the interface is currently active.
-
Inactive
— Indicates the interface is currently inactive.
•
IP Address — Indicates IP address of the interface.
•
VLAN — Indicates if the address is associated with a VLAN.
•
MAC Address — Displays the MAC address of the interface.
•
Type — Displays the IP address type. The possible field values are:
-
Dynamic
— Indicates the IP address is dynamically created.
-
Static
— Indicates the IP address is a static IP address.
-
Learned — Indicates the IP address is dynamically defined by the DHCP
server. (This field appears as a read-only field in the table).
•
Reason — Displays the reason an IP source address is inactive. The possible
field options are:
-
No Problem
— Queries the VLAN database by EtherChannel number.
— Indicates the IP address is active.
5
190