Cisco ESW 500 Administration Manual page 372

Configuring SNMP
Managing Cisco Discovery Protocol
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
Click Monitor & Device Properties > CDP. The
CDP Neighbor Details Page
Click Details. The
CDP Neighbor Details Page
In addition to the fields in the
the following additional fields:
•
IP Address — Indicates the address TLV advertised by the neighboring port.
•
Interface — Indicates the interface type advertised by the neighboring port.
The possible field values are:
-
Ethernet
— Indicates the neighboring interface is an Ethernet port.
-
Fast Ethernet
port.
-
Giga Ethernet
port.
•
Port ID (outgoing port) — Indicates the neighboring device's port from which
the CDP packet was sent.
•
Version — Indicates the software version installed on the neighboring device.
CDP Page
, the
— Indicates the neighboring interface is an Fast Ethernet
— Indicates the neighboring interface is an Giga Ethernet
CDP Page
opens
opens:
CDP Neighbor Details Page
13
contains
361