Cisco ESW 500 Administration Manual page 244

Configuring IP Information
Defining DHCP Relay
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
Click Monitor & Device Properties > System Management > IP Addressing >
DHCP Relay > DHCP Server. The
DHCP Server Page
DHCP Server Page
The
•
DHCP Relay — Enable or disable DHCP Server on the device. The possible
values are:
-
Enable
— Enables DHCP Relay on the device.
-
Disable
— Disables DHCP Relay on the device.
•
Option 82 — Indicates if Option 82 is enabled for DHCP. The possible values
are:
-
Enable
— Enables Option 82 for DHCP.
-
Disable
— Disables Option 82 for DHCP.
•
DHCP Server — Display the IP address of the DHCP server.
Click the Add button. The
DHCP Server Page
Server contains the following fields:
Add DHCP Server Page
opens:
opens:
8
233