Modifying Acl Binding - Cisco ESW 500 Administration Manual

Configuring Device Security
Defining Access Control
STEP 1
STEP 2
STEP 3
ESW 500 Series Switches Administration Guide
•
To Entry Number(s) — Assigns the copied ACL binding configuration to the
specified table entry.
•
Ports/EtherChannels — Indicates the interface to which the ACL is bound.
For each entry, an interface has a bound ACL.
•
Interface — Indicates the interface to which the associated ACL is bound.
•
ACL Name — Indicates the ACL which is bound to the associated interface.
•
Type — Indicates the ACL type to which is bound to the interface.

Modifying ACL Binding

Click Security > Access Control Lists (ACL) > ACL Binding. The
opens:
Click the Edit button. The
Edit ACL Binding Page
The Edit ACL Binding Page
•
Interface — Indicates the interface to which the ACL is bound.
•
Select MAC Based ACL — Indicates the MAC based ACL which is bound to the
interface.
•
Select IP Based ACL — Indicates the IP based ACL which is bound to the
interface.
Define the relevant fields.
Edit ACL Binding Page
contains the following fields:
ACL Binding Page
opens:
5
169