Cisco ESW 500 Administration Manual page 67

Managing Device Information
Managing Cisco Discovery Protocol
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
•
Port ID — Indicates the neighboring device's port from which the CDP packet
was sent.
CDP Status
Select Enable in the
the device.
Define a VLAN ID to be advertised by the device in the
Click Apply. CDP is enabled, and the device is updated.
To view additional neighboring device CDP information:
Click Monitor & Device Properties > CDP. The
CDP Neighbors Details Page
Click Details. The
CDP Neighbors Details Page
In addition to the fields in the
the following additional fields:
•
Device ID — Indicates the name of the neighbor device and either the MAC
address or the serial number of the device.
field to enable the Cisco Discovery Protocol on
CDP Page
opens:
CDP Page CDP Neighbors Details Page
, the
2
Voice VLAN
field.
opens.
contains
56