Cisco ESW 500 Administration Manual page 227

Configuring VLANs
Assigning Ports to Multiple VLANs
STEP 1
ESW 500 Series Switches Administration Guide
Click VLAN & Port Settings > VLAN Management > VLAN to Port. The
Port Page
opens:
VLAN To Port Page
VLAN To Port Page
The
•
Ports — Indicates that ports are described in the page.
•
EtherChannels — Indicates that EtherChannels are described in the page.
•
Port — Displays the port number.
•
Mode — Indicates the port mode. The possible values are:
-
General
— Indicates the port belongs to VLANs, and each VLAN is user-
defined as tagged or untagged (full IEEE802. 1 q mode).
-
Access —
-
Trunk —
Indicates the port belongs to VLANs in which all VLANs are
tagged, except for one VLAN that is untagged.
-
Customer —
contains the following fields:
Indicates a port belongs to a single untagged VLAN.
The port belongs to a VLAN in which all ports are untagged.
7
VLAN To
216