Cisco ESW 500 Administration Manual page 106

Configuring System Time
Defining SNTP Authentication
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
Click Monitor & Device Properties > System Management > Time > SNTP
SNTP Authentication Page
Authentication. The
SNTP Authentication Page
SNTP Authentication Page
The
•
Enable SNTP Authentication — Indicates if authenticating an SNTP session
between the device and an SNTP server is enabled on the device. The
possible field values are:
-
Checked
— Authenticates SNTP sessions between the device and
SNTP server.
-
Unchecked
device and SNTP server.
•
Encryption Key ID — Indicates the Key Identification used to authenticate the
SNTP server and device. The range is 1 - 4294967295.
•
Authentication Key — Displays the key used for authentication.
•
Trusted Key — Indicates the encryption key used (Unicast/Anycast) or elected
(Broadcast) to authenticate the SNTP server.
Click the Add button. The
contains the following fields:
— Disables authenticating SNTP sessions between the
Add SNTP Authentication Page
opens:
opens:
4
95