Cisco ESW 500 Administration Manual page 139

Configuring Device Security
Defining Traffic Control
STEP 1
ESW 500 Series Switches Administration Guide
Click Security > Traffic Control > Storm Control. The
Storm Control Page
Storm Control Page
The
•
Unknown Unicast Group Control
Unknown Unicast Control as the Broadcast Mode globally defined on the
device.
•
Rate Threshold
second) at which unknown packets are forwarded. The range rate is 3500-
100,000 Kbps.
•
Copy From Entry Number — Copies the storm control configuration from the
specified table entry.
•
To Entry Number(s) — Assigns the copied storm control configuration to the
specified table entry.
•
Port — Indicates the port from which storm control is enabled.
•
Enable Broadcast Control — Indicates if Broadcast packet types are
forwarded on the specific interface. The possible field values are:
-
Enable
— Enables Broadcast packet types to be forwarded. This is the
default value.
contains the following fields:
— On ESW 520 devices, sets the
— On FE devices, sets the maximum rate (packets per
Storm Control Page
opens:
5
128