Cisco ESW 500 Administration Manual page 426

Aggregating Ports
Defining EtherChannel Management
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
•
Link State — Displays the link operational status.
•
Member — Displays the ports configured to the EtherChannel.
Modifying LAG Membership
Click VLAN & Port Settings > Port Management > EtherChannel Management. The
EtherChannel Management Page
Click the Edit button. The
Edit EtherChannel Management Page
Edit EtherChannel Management Page
The
•
EtherChannel — Displays the EtherChannel number.
•
EtherChannel Name — Displays the EtherChannel name.
•
LACP — Indicates that LACP is enable on the EtherChannel. The possible field
values are:
-
Checked — Enables LACP on the EtherChannel.
-
Unchecked — Disables LACP on the EtherChannel. This is the default
value.
opens:
Edit EtherChannel Management Page
contains the following fields.
18
opens:
415