Cisco ESW 500 Administration Manual page 49

Getting Started
Using The Switch Console Port
STEP 4
STEP 5
STEP 6
STEP 7
ESW 500 Series Switches Administration Guide
On the PC, launch a terminal emulation program such as HyperTerminal (bundled
with Windows) or Putty (freeware) and configure a new connection with the
following settings:
•
Speed or Bits Per Second — 115200
•
Data Bits — 8
•
Stop Bit — 1
•
Parity — None
•
Flow Control — None
•
Serial Port — Choose the appropriate serial or COM port on the PC that the
console cable is connected to
Save these settings and open a connection using the terminal emulation software.
If a blinking cursor appears, press Tab and enter the default username
press Tab again and enter the default password
The switch main menu opens.
The System Configuration Menu line should be highlighted.
Press Enter. The page changes to System Configuration Menu.
cisco
. Press Enter to continue.
1
cisco
and
38