Enabled Vlan Table - Cisco ESW 500 Administration Manual

Configuring Device Security
Defining Dynamic ARP Inspection
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
Click Security > ARP Inspection > VLAN Settings. The
Settings Page
opens:
ARP Inspection VLAN Settings Page
ARP Inspection VLAN Settings Page
The
•
VLAN ID — A user-defined VLAN ID to add to the Enabled VLANs list.
•
List Name — Contains a list of VLANs in which ARP Inspection is enabled.

Enabled VLAN Table

•
VLAN ID— Indicates the VLAN which is bound to the ARP Inspection List.
•
List Name — Displays names of static ARP Inspection Lists that were assigned
to VLANs. These lists are defined in the
Enter the name of a VLAN ID from the VLAN ID list and click Add. This VLAN ID then
appears in the list. The
contains the following fields:
ARP Inspection List Page.
Add ARP VLAN Settings Page
ARP Inspection VLAN
opens:
5
200